Geovision GV-Camera Reader GV-CS1320 2MP H.264 Camera Access Controller with a Built-in Card Reader 84-CS13200-0010

Geovision GV-CS1320 2MP H.264 Camera Access Controller with a Built-in Card Reader 84-CS13200-0010

GV-CS1320 is an access controller with a built-in 2 MP camera and 13.56 MHz reader.

GV-CS1320 recognizes identification cards and grants access to up to 40,000 users accordingly. With the integration of the wide angle camera, the Card and Face Mode enables GV-CS1320 to perform face detection together with card verification before access can be granted.

Visitors requesting entry permits can use the touch pad to be granted access. There are 3 types of notifications the operators can receive to grant access.

GV-ASNotify Program:

When GV-CS1320 is connected to GV-ASManager over the network, GV-ASNotify generates a notification message and snapshot whenever the touch pad is activated. The operator can use GV-ASNotify to watch live view and communicate with the surveillance site via the microphone and speaker functions.

GV-Access Mobile App:

Similarly, the operator can launch mobile app GV-Access to enable live view and voice communication with visitors at the door before permitting entry. After adding GV-ASManager to GV-Access, the operator will get an alert notification upon the trigger of the touch pad.

VoIP Calls:

When the touch pad is activated, GV-CS1320 will place a call to the operator through the Internet using VoIP. The operator can then communicate with the visitor and enter the access code to open the door.

The all-in-one solution eliminates the need of installing and maintaining a separate camera in addition to the card reader and a door entry system.

Key features of Geovision GV-CS1320

• 2MP progressive scan super low lux CMOS
• Minimum illumination at 0.02 lux
• Dual streams from H.264 and MJPEG
• Up to 15 fps at 1920 x 1080
• Day and night function (with removable IR-cut filter)
• Built-in IR with effective distance up to 3 m (9.84 ft)
• Ingress protection (IP66)
• DC 12V, 2.5A / PoE+ (IEEE 802.3at)
• Built-in microphone and speaker
• Wide Dynamic Range (WDR)
• Built-in micro SD card slot
• Provides 180° panorama view
• ONVIF (Profile S, C) conformant
• Built-in 13.56 MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
• Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security
• Access by card plus face detection
• RS-485 and network interface for connecting up to 2 readers
• Enabling different access control modes according to the Authentication Schedule: Card only mode (default), Card and Face Mode
• 1 door (one-way and two-way control)
• Bell button (touch pad) for talk mode
• Receiving live view and capturing snapshots when card is presented
• Anti-Passback (APB) support
• 2 inputs, dry contact (Door Sensor / Exit Button)
• 1 relay outputs (30V DC, 0.5A)
• Support for GV-I/O Box 4 Ports for sensor, alarm application and door bell activation

Accessories:

GV-IB25 / 65 / 85 Infrared Button: The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.

GV-AS ID Card & GV-AS ID Key Fob: For Card Mode, the GV-AS ID Card / Tag is required. 13.56 MHz cards and tags are available.

Note:

• GV-CS1320 does not support 3rd party readers.
• To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
• All specifications are subject to change without notice.