LTS LTK3607FM-T Face Recognition Terminal with Temperature Screening Function

LTS LTK3607FM-T Face Recognition Terminal with Temperature Screening Function

LTK3607FM-T face recognition terminal is a kind of access control device
integrated with temperature screening function. It can fast taking
skin-surface temperature and upload abnormal temperature event to the
center, which can be widely applied in multiple scenarios, such as
enterprises, stations, dwellings, factories, schools, campus and so on.

Key Features:

• Realtime Temperature and Face Mask Alerts,
• Abnormal Body Temperature Alert,
• Forehead Temperature Module and 7 inch Touchscreen,
• Local offline recognition supported,
• Detect face and measure temperature within 0.2s,
• Temperature Range 86°F to 113°F,
• Measurement Deviation ≤ 0.9°F,
• Measurement Distance: 1 to 6 ft,
• Temperature Measurement Version PC Software
• Supports Vanadium Oxide uncooled sensor to measure target’s temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
• Recognition distance: 0.3 to 1.8 m
• Fast temperature measurement mode: Detects face and takes temperature without identity authentication
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and
  temperature, etc
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
  same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
  the same time, the authentication or attendance will be failed
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting abnormal temperature
• Configurable door status (open/close) when detecting abnormal temperature
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
  data on the client software
• Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
  6000 face capacity, 6000 card capacity, and 100,000 event capacity
• Suggested height for face recognition: between 1.4 m and 1.9 m
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Watchdog design and tamper function
• Audio prompt for authentication result
• NTP, manually time synchronization, and auto synchronization
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
• Imports and export data to the device from the client software

Notes:

• * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
• * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.